How to Reset your Yeasu FT-530 HT

Hit Counter
Since 02-02-05


From: Amateurtech@vxstdusa.com
Sent: Wednesday, February 02, 2005 9:37 AM
To: Me
Subject: RE: Inquiry: Tech Support

Hello
To do a reset first turn the radio off.

Then press and hold down the MR and VFO both at the same time as you turn it back on.

Once it's powered up you may release them.

If you do not have extended rec turn the radio back off.

Then press and hold down the MHZ UP and MHZ DOWN as you turn the radio back on.

I did find a manual on line for you at the link below.
http://www.rigpix.com/yaesu/ft530.htm



-----Original Message-----
From: Web site inquiry [mailto:null@roaringsky.com]
Sent: Monday, January 31, 2005 4:36 PM
To: amateurtech@vxstdusa.com
Subject: Inquiry: Tech Support

The following inquiry was made from www.yaesu.com  on 1-31-05 at 4:36pm:

From: Me
Type: Tech Support

Hello:

I bought my Yeasu FT-530 HT new in January 1993. In late 2003 the internal battery died. I got a replacement battery recently, but all my memory was gone - as expected. However, the radio does not recognize the clock key and other functions.

I cannot find my User's Manual or the copies that I made of it.

Can you tell me how I can reset the radio to its defaults, i.e. what combination of keys to press simultaneously to reset the radio?



Type: Amateur VHF/UHF transceiver
Frequency range: TX: 144-146 / 430-440 MHz (Europe and Asia)
TX: 144-148 / 430-450 MHz (USA)
RX: 110-180 / 300-500 / 800-950 MHz
Steps: 5/10/12.5/15/20/25/50 KHz
Mode: FM
RF Power output: Hi: 5/5 W
Lo: .5/1/2 W
Sensitivity: N/A
Selectivity: N/A
Image rejection: N/A
Voltage: 5.5-16 VDC
Current drain: RX: 16-190 mA
TX: Max 1.6 A
Impedance: 50 ohms, BNC
Dimensions (W*H*D): 55*134*33 mm (with FBA-12)
Weight: 530 gr (with FNB-27 and antenna)
Manufactured: 1992-19xx
Other: Twin RX
New price 1993 in Sweden: 5615:- SEK